PLEASE NOTE – All Version 8 GSM Commanders now operate off one version of Software.
You no longer need to download model specific versions for your Version 8 Commander.
The same hardware & software limitations apply to each model of GSM Commander as before.

Version 7 GSM Commanders still operate with version specific software, so be sure to
download the correct version for the device you are connecting to
i.e. GC0101 / GC0321 / GC0641 or GC1281

Version 8 Software

  • ss7 box - GSM Commander
    SmartSetup - V8 10.54 MB 8400 downloads

    SmartSetup V8.21H

    Supports GC0108 / GC0328 / GC0648 & GC1288

    CHANGE LOG

      • V8.21H CHANGE LOG:

      Fixed Modbus Timing Issue so that Special Character M are not needed 

      Problem with reporting sender number fixed

      Added support for last 4 Hooks

    • V8.21F CHANGE LOG:

    Fixed airtime checking bug for Nambian Networks

    • V8.21E CHANGE LOG:

    Introduction of multi-baud rate support on RS485 Modbus RTU (2400 - 230 400 now supported for mapped registers)

    Fixed bug for I/O expansions intermittent communication issues

    Stability improvements

     

     

    Download

Version 7 Software

  • ss7 box - GSM Commander
    SmartSetup - GC1281 (Professional Commander) V7.52H 8.21 MB 6326 downloads

    SmartSetup V7.52H -  Latest  Version of Firmware for GC1281

    - Minor fix on Airtime checking, now looks for single or double digit after decimal (MTN is the main network fix applies to)

    Download
  • ss7 box - GSM Commander
    SmartSetup - GC0641 (Standard Commander) V7.52H 8.21 MB 6711 downloads

    SmartSetup V7.52H -  Latest  Version of Firmware for GC0641

    - Minor fix on Airtime checking, now looks for single or double digit after decimal (MTN is the main network fix applies to)

    Download
  • ss7 box - GSM Commander
    SmartSetup - GC0321 (Lite Commander) V7.52H 8.40 MB 6238 downloads

    SmartSetup V7.52H -  Latest  Version of Firmware for GC0321

    - Minor fix on Airtime checking, now looks for single or double digit after decimal (MTN is the main network fix applies to)

    Download
  • ss7 box - GSM Commander
    SmartSetup - GC0101 (Micro Commander) V7.52H 6.17 MB 5633 downloads

    SmartSetup V7.52GH -  Latest  Version of Firmware for GC0101

    - Minor fix on Airtime checking, now looks for single or double digit after decimal (MTN is the main network fix applies to)

    Download
  • ss7 box - GSM Commander
    SmartSetup - GC1280 (PLC Commander) V7.50A 10.36 MB 6448 downloads

    SmartSetup v7.41B -  Latest  Version of Firmware for GC1280

    Download