NEW! Airdrive

Airdrive is the GSM Commander's GPRS platform.

This allows remote configuration of your GSM Commander as well as retrieving the current configuration from the remote device.

Imagine never having to drive out to a remote site to change a configuration again!

It also allows logging via GPRS, sending events (messages) via GPRS and remote controlling of outputs.

Read more by clicking here.

GSM COMMANDERS

GSM Commander can be used to monitor inputs, measure analogue voltages , and remotely control outputs. The GSM Commander is configured using a software program that provides an easy wizard interface. The GSM Commander connects to the PC via a USB cable for the purpose of configuration, after which it may be disconnected from the PC for standalone operation. Some setup operations can also be performed via SMS messages.

It contains a quad-band integrated GSM cellular engine that allows it to connect to the cellular network to send and receive SMS messages.

For more info, you can download the manual here

EXPANDERS

The Expansion unit provides an additional 5 inputs and 5 outputs.

One may connect upto 6 Expansion units to a single GSM Commander, to bring the total number of inputs and outputs to 32. The unit is supplied with a short Ribbon cable that is connected to the Expansion port of the GSM Commander.

ANTENNAS

We stock a complete range of antennas to satisfy any need.  From the standard "el cheapo" antennas for indoor use where there is good signal, to hardcore outdoor antennas to allow your Commander to operate under the faintest of signal conditions.

 ACCESSORIES

We supply a range of accesories for the Commander, which includes various power supplies, temperature probes, batteries etc.

 SOFTWARE

In addition to our GSM Commander setup software, we also provide logging and remote site management software. Get your free copy for evaluation purposes!